No more worrying about disappearing equipment or it going unused
These small trackers (3.2 cm x 2.2 cm x 2.2 cm x 0.5 cm) are used to geolocate tools by Bluetooth. Due to their small size, they can easily be hidden. The purpose of these trackers is to know the location of a tool within a limited area and at a low cost. This way, we can determine on which shelf the tool is and be alerted when it enters or exits the area (container, vehicle,…).
Beacon Bluetooth
Dimensions (all incl.): 3.2 cm(L) x 2.2 cm (W) x 0.5 cm (H).
Weight: 7g.
IP67 enclosure: dust, water, and shock-resistant
Battery: 225mAh CR2032 Li 3V battery (2 to 4 years of autonomy)
Range: 50m maximum, depending on the environment.
Equipped with an accelerometer to detect the setting in motion.
Automatic scanning by a reader.
The IoT tracker is entirely autonomous. It has its own battery (4 to 10 years of autonomy depending on use) and must not be connected to the vehicle’s battery. The IoT tracker is used for large equipment without batteries such as trolleys, pallets or containers. This tracker uses IoT (Internet of Things) technology and the Sigfox network (French network created for IoT) or Lora (network also developed in France) to ensure geolocation.
Internet of Things (IoT)
Dimensions (battery 8.8000 maH incl.): 100 x 60 x 37mm.
Dimensions (incl. battery 2,200 maH): 100 x 60 x 23mm.
Performance: optimal between -20°C and +85°C
The GPS position sending frequency is max. 140 signals in 24 hours (+- 1 signal every 11 minutes). Generally, we configure it to send 1 to 2 positions per day to optimize the battery life.
The approximate battery life will be provided with the configuration of the autonomous IoT Tag (generally between 4 to 10 years).
The active RFID tag makes it possible to locate the tool to avoid theft, to find it quickly, or to take inventory quickly. It should be placed on each tool to be tracked. It then will be linked to an RFID reader that compiles an inventory of all the tags present in a 500m area around it. This way, you can be aware of which tools are present or not, as well as their location. You can also receive alerts if a tool is not detected for a given period of time to warn you of possible theft or loss.
Keyfob
Krypton
Krypton PLUS
Active RFID Tag Keyfob
Dimensions (all incl.): diameter 35mm x depth 11 mm.
Weight: 15g
Performance: optimal between -25°C and +85°C
Battery life: Up to 5 years
ISM frequency: 868 MHz and 2.4 GHz
Housing: shock, dust and water-resistant (IP68)
The installation is generally done with extra strong glue. It can be hung up, thanks to the holes provided.
Active RFID Tag "Krypton" type
Dimensions (all incl.): +- 52(L) x 48(W) x 10 mm(H).
Weight: 29g
Performance: optimal between -25°C and +85°C
Housing: water and dust resistant (IP67)
Battery life: Up to 5 years
ISM frequency: 868 MHz and 2.4 GHz
Equipped with a motion sensor and an ON/OFF sensor, each of which detects when the tool is started and when it moves.
Active RFID Tag "KRYPTON PLUS" type
Dimensions (all incl.): +- 81(L) x 48(W) x 10 mm(H).
Weight: 65-80g
Performance: optimal between -25°C and +85°C
Housing: shock, water and dust resistant (IP68)
Battery life: Up to 10 years
ISM frequency: 868 MHz and 2.4 GHz
Equipped with a motion sensor and an ON/OFF sensor, each of which detects when the tool is started and when it moves.
Equipped with an internal and external temperature sensor.
The QR Code is a technology used to geolocate and manage a stock of tools. Each item in the stock is to be equipped with a unique QR Code that is to be scanned (automatically or not) to indicate an entry or exit of material.
QR Code / Barcode
Dimensions: any size
Format: labels to be placed
Scanning performed by a reader.
The RFID reader installed in the vehicle instantly sends all the equipment connected to this RFID reader within a radius of 500 meters. If a device is not listed by a company RFID reader within a certain period of time, an alert is sent to you.
Thanks to the localization of the equipment, you can quickly and easily dispatch which equipment should go to which worksite. Thanks to this system, you’ll see an end to unnecessary tool purchasing.
No more unnecessary purchases because you think a machine might be lost or stolen, the localization of the equipment tells you at any time who is in possession of the equipment.
With Hit-Tracking, you can always keep track of your tools. Additionally, if a tool is not detected by an RFID reader for a certain period of time, an alert message is sent to you.